ORIGINAL ARTICLE
Pt- and Pd-Based Carbon-Supported Catalysts for Efficient Hydrogen
Storage via Toluene Hydrogenation in LOHC Systems
More details
Hide details
1
Department of Material Science and Engineering,, King Fahd University of Petroleum and Minerals (KFUPM), Dhahran, Saudi Arabia
2
Center for Hydrogen Technologies and Carbon Management (IRC-HTCM), Interdisciplianry Research Center for Hydrogen Technologies and Carbon Management (IRC-HTCM), King Fahd University of Petroleum and Minerals (KFUPM), Dhahran, Saudi Arabia
Submission date: 2026-04-23
Final revision date: 2026-05-10
Acceptance date: 2026-08-22
Publication date: 2026-11-16
Corresponding author
Mohammed Nasiruzzaman Shaikh
Center for Hydrogen Technologies and Carbon Management (IRC-HTCM), Interdisciplianry Research Center for Hydrogen Technologies and Carbon Management (IRC-HTCM), King Fahd University of Petroleum and Minerals (KFUPM), Dhahran, Saudi Arabia
Journal of Undergraduate Research International 2026;2(3B):119-126
KEYWORDS
TOPICS
ABSTRACT
This study examined the performance of platinum and palladium catalysts on activated carbon and sulfur-doped carbon supports
for hydrogenating toluene and storing hydrogen in liquid organic hydrogen carrier systems. A wet impregnation method was used to
synthesize the catalysts, which were systematically characterized using X-ray diffraction (XRD), scanning electron microscopy with
energy-dispersive spectroscopy, and transmission electron microscopy.XRDanalysis confirmed that the predominantly amorphous
nature of the carbon supports the high dispersion of the metal species, whereas microscopic analysis showed clear morphological
differences caused by sulfur doping and differences in the dispersion and crystallinity of the metal. The catalytic performance was
tested in a high-pressure batch reactor with a temperature ranging between 100 and 200 °C and a pressure of hydrogen of up to 70
bar. Among the catalysts, 1% Pt/AC was found to be the most active catalyst, with a toluene conversion of 73.3% at 150 °C and 50 bar
H2, whereas the Pd-based and sulfur-doped catalysts were much less active. All catalysts showed good selectivity for methylcyclohexane
(>99%). The parametric analyses showed that the heating temperature had a dominant influence in the catalytic performance,
which was most effective at 150 °C, whereas an increase in hydrogen pressure yielded a moderate increase in conversion. The
superior performance of 1% Pt/AC was attributed to the high metal dispersion and good metal–support interaction.