ORIGINAL ARTICLE
Electrochemical Deposition of Mono- and Bi-metallic Ni-Cu Electrodes
for 5-Hydroxymethylfurfural Oxidation to 2,5-Furandicarboxylic Acid
More details
Hide details
1
Chemical Engineering, KFUPM, Saudi Arabia
Submission date: 2026-04-25
Final revision date: 2026-05-15
Acceptance date: 2026-08-23
Publication date: 2026-11-16
Journal of Undergraduate Research International 2026;2(3B):24-37
KEYWORDS
TOPICS
ABSTRACT
Electrochemical oxidation of biomass-derived molecules has gained increasing attention as a sustainable route for producing value-added chemicals. In this work, the performance of Ni-, Cu-, and Ni–Cu-based catalysts for the electrochemical oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA) was investigated using a direct electrodeposition method on a nickel foam. Different deposition strategies, including single-metal deposition, mixed-metal deposition, and layer-by-layer (LBL) configuration, were examined to evaluate their influence on electrocatalytic activity. The electrodeposition process was systematically studied by varying precursor volume, applied potential, and deposition mode, including pulsed electrodeposition. Structural characterization using SEM and EDX confirmed differences in morphology and metal distribution across the prepared samples. The electrochemical results showed that Ni–Cu-based electrodes, particularly which were prepared via mixed and LBL configurations, exhibited enhanced activity compared to single-metal electrodes. The optimized Ni–Cu electrodes prepared at −2.0 V exhibited higher current densities during HMF oxidation (~0.20 A cm⁻² at ~1.80 V vs RHE) compared to other conditions, along with a lower onset potential relative to OER, indicating improved catalytic activity. Overall, this study demonstrates that catalyst composition, deposition strategy, and operational parameters play a critical role in designing effective transition metal-based electrocatalysts for HMF oxidation.