PL EN
Improvements in methods for monitoring anchor casings in mining excavations of KGHM Polska Miedź S.A. mines
 
 
More details
Hide details
1
KGHM Cuprum Research & Development Centre, Wroclaw, Poland.
 
 
Corresponding author
Maciej Madziarz   

KGHM Cuprum Research & Development Centre, ul.Gen.Wł.Sikorskiego 2-8, 53-659 Wroclaw, Poland.
 
 
Mining Science 2015;22:115-125
 
KEYWORDS
TOPICS
ABSTRACT
This article presents the results of works carried out by KGHM CUPRUM Sp z o.o. CBR (Research and Development Centre), on behalf of KGHM Polska Miedź SA. It is aimed at improving previously used monitoring methods of mine excavation anchor casings used in underground copper ore mines of KGHM Polska Miedź S.A. It presents a method allowing for continuous measurement and recording of load changes in instrumented anchors. This method was developed by request of KGHM Polska Miedź S.A. Particular attention was paid to issues related to the impact of dynamic changes of rock formation pressure on the excavation in anchor casing.
 
REFERENCES (9)
1.
Butra J. et al., 2006. Determination of the range of changes in loads affecting the anchor casing caused by seismic quakes (in polish), KGHM CUPRUM Sp. z o.o. CBR, unpublished.
 
2.
Cała M., Flisiak J., Tajduś A., 2001, Mechanizm współpracy kotwi z górotworem o zróżnicowanej budowie, Biblioteka Szkoły Eksploatacji Podziemnej, Seria z Lampką Górniczą, Nr 8, Kraków.
 
3.
Dębkowski R. et al., 2003, Assessment of the work of anchors under dynamic loads caused by quakes (in polish), KGHM CUPRUM Sp. z o.o. CBR, unpublished.
 
4.
Dębkowski R., Madziarz M., Sawicki W., Osadczuk T., 2007, Tests of changes in loads of expansion anchors as a result of seismic shocks (in polish), Geotechnics in building and mining industry, Scientific Works of Institute of Geotechnics and Hydrotechnics Wrocław University of Technology, Conferences, No. 42, Wrocław University of Technology Printing House. pp. 678-687.
 
5.
John C.M.St., Zahrah T.F., 1987, Aseismic design of underground structures, Tunneling and Underground Space Technology, Vol. 2, Nr. 2, s. 165–197.
 
6.
Madziarz M.: Sawicki W., 2005, Elaboration of measurement system for testing the resistance to dynamic loads of basic casing anchors in the mines of LGOM together with execution of preliminary underground measurements (in polish), Reports of the Institute of Mining Wrocław University of Technology, Ser. SPR, no. 81, unpublished.
 
7.
Madziarz M., Sawicki W., 2009, Measurements of the impact of shocks on the work of anchor casing (in polish), Reports of the Institute of Mining Wrocław University of Technology, Ser. SPR, no. 110,unpublished.
 
8.
Madziarz M., Dębkowski R., Szpak M., 2010, Changes of axial forces in poles of expansion anchorsagainst the background of seismic activity in the fields A and G of section G-23 in ZG “Polkowice-Sieroszowice” mine (in polish), CUPRUM Czasopismo Naukowo-Techniczne Górnictwa Rud, No. 1, pp. 53–64.
 
9.
Madziarz M. et al., 2011, Examination of the impact of roof vibrations caused by seismic quakes on load changes in joint anchor poles (in polish), KGHM CUPRUM Sp. z o.o. CBR, unpublished.
 
eISSN:2353-5423
ISSN:2300-9586
Journals System - logo
Scroll to top