PL EN
THE MECHANISM OF FRICTION BETWEEN SURFACES WITH REGULAR MICRO GROOVES UNDER BOUNDARY LUBRICATION
 
More details
Hide details
1
Department of Fundamentals of Technology, Lublin University of Technology, Nadbystrzycka 38, 20-618 Lublin, Poland
 
2
Engineering Department, National Aviation University, Kyiv, Ukraine.
 
3
Department Mechanical and Engineering, Pryazovskyi State Technical University, Mariupol, Ukraine
 
 
Publication date: 2012-12-01
 
 
Corresponding author
Mykhaylo Pashechko   

Department of Fundamentals of Technology, Lublin University of Technology, Nadbystrzycka 38, 20-618 Lublin, Poland
 
 
Adv. Sci. Technol. Res. J. 2016; 10(32):82-85
 
KEYWORDS
TOPICS
ABSTRACT
The results of researches related to the influence of partially regular microrelief parameters on the adhesion component of the friction factor under boundary lubrication have been given. A special ring-on tape test rig is proposed in order to avoid errors during running-in process. Special technique is used to form sinusoidal microgrooves what helped to create a partially regular microrelief on the surface with controlled contour and nominal contact areas. Fatigue and deformation components of wear process are considered. We proved that microtexturing with proposed parameters decreases the adhesion component of friction and reduces the probability of microwelding. It has been shown that under boundary friction micro grooves are effective on precision surfaces with low roughness when lack of film and probability of seizure appear.
Journals System - logo
Scroll to top