PL EN
THEORETICAL AND EXPERIMENTAL ANALYSIS OF LOADING IMPACT FROM THE PROGRESSIVE GEAR ON THE LIFT BRAKING DISTANCE WITH THE USE OF THE FREE FALL METHOD
 
More details
Hide details
1
Lift Service S.A. Roztocze Str. 6, 20-722 Lublin, Poland
 
2
Lublin University of Technology, Mechanical Engineering Faculty, Department of Machine Design, Nadbystrzycka 36, 20-618 Lublin, Poland
 
 
Publication date: 2016-06-01
 
 
Corresponding author
Paweł Lonkwic   

Państwowa Wyższa Szkoła Zawodowa, Depułtycze Królewskie 55, 22-100 Chełm, Poland
 
 
Adv. Sci. Technol. Res. J. 2016; 10(30):103-109
 
KEYWORDS
TOPICS
ABSTRACT
The gear which is the central safety element of the friction drive lift during braking is exposed to overloading connected with changeable weight which loads the lift braking system. In the article the results of numerical analysis for braking process of CHP 2000 type progressive gear distinguished by an innovative design have been presented. The numerical analysis was conducted with the use of a simulation of the gear roller displacement depending on changeable loading with the support of Abaqus/CAE software. Displacement of the gear roller from the neutral position in which the gear starts loosing energy of speeding up weight to zero was simulated. The results obtained from computer simulations were verified on the basis of a physical experiment at the bench station created to verify braking parameters of the gears with the use of free fall method.
Journals System - logo
Scroll to top