PL EN
THE IMPACT OF PROGRESSIVE GEAR GEOMETRY ON THE BRAKING DISTANCE LENGTH UNDER CHANGEABLE OPERATING CONDITIONS
 
More details
Hide details
1
Lublin Factory of Passenger Lifts ‘Lift Serivce’ S.A. Roztocze Str. 6, 20-722 Lublin, Poland
 
2
Lublin University of Technology, Mechanical Engineering Faculty, Department of Motor Vehicles, Nad-bystrzycka Str. 36, 20-722 Lublin, Poland
 
3
AGH University of Science and Technology, Faculty of Mechanical Engineering and Robotics, Department of Rope Transport, Mickiewicza Str. 30, 30-059 Kraków, Poland
 
 
Publication date: 2016-03-01
 
 
Adv. Sci. Technol. Res. J. 2016; 10(29):161-167
 
KEYWORDS
ABSTRACT
This article presents independent tests results focused on the geometry impact of progressive gear used in a short distance transportation devices on the braking distance length both under changeable operating conditions as well as changeable loading. Variable operating conditions were obtained with the use of various lubricating agents. Five types of gears such as ASG100, PP16, PR2000, KB160 and a new solution CHP2000 were used for the tests. The tests were conducted with a free fall method application. The method gave a chance to evaluate reliability of tested gears systems and to compare the existing solutions with the proposed gear of CHP2000 type.
 
REFERENCES (10)
1.
Feng L., Bao Y., Zhou X., Wang Y. High speed elevator car frame’s finite elements analysis. Advanced Materials Research 510, 2012, 298–303.
 
2.
Filas J., Mudro M. The dynamic equation of motion of driving mechanism of a freight elevator. Procedia Engineering 48, 2012, 149–152.
 
3.
Jong de J. Understanding the natural behavior of elevator safety gears and their triggering. The International Congress on Vertical transportation technologies, Istambul 2004.
 
4.
Kayaoglu E., Salman O., Candas A. Study on stress and deformation of an elevator safety gear brake block using experimental and FEA methods. Advanced Materials Research 308-310, 2011, 1513–1518.
 
5.
Klepka T., Dębski H., Rydarowski H. Characteristic of high-density polyethylene and its properties simulation with use of finite element method. Polimery 54(9), 2009, 668–672.
 
6.
Lonkwic P, Różyło P, Dębski H. Numerical and experimental analysis of the progressive gear body with the use of finite-element method. Maintenance and Reliability 17(4), 2015, 542–548, http://dx.doi.org/10.17531/ein....
 
7.
Lonkwic P. Influence of friction drive lift gears construction on the length of braking distance. Chinese Journal of Mechanical Engineering 28(2), 2015, 363–368.
 
8.
Polska Norma PN EN 81-1 Przepisy bezpieczeństwa dotyczące budowy i instalowania dźwigów. Cz. 1. Dźwigi elektryczne 2002.
 
9.
Onur Y.A., Imrak C.E. Reliability analysis of elevator car frame using analytical and finite element methods. Building Services Engineering Research & Technology 33(3), 2012, 293–305.
 
10.
Taplak H., Erkaya S., Yildirim S., Uzmay I. The use of neural network predictors for analyzing the elevator vibrations. Mechanical Engineering 39, 2014, 1157–1170.
 
Journals System - logo
Scroll to top