PL EN
MECHANISMS OF CUTTING BLADE WEAR AND THEIR INFLUENCE ON CUTTING ABILITY OF THE TOOL DURING MACHINING OF SPECIAL ALLOYS
 
More details
Hide details
1
Department of Machining, Assembly and Engineering Metrology, Faculty of Technical Engineering, VSB-Technical University of Ostrava, 17 Listopadu 15/2172, 708 33 Ostrava-Poruba, Czech Republic
 
 
Publication date: 2016-09-01
 
 
Adv. Sci. Technol. Res. J. 2016; 10(31):144-150
 
KEYWORDS
TOPICS
ABSTRACT
With increased requirements for quality and shelf life of machined parts there is also a higher share of the use of material with specific properties that are identified by the term “superalloys”. These materials differ from common steels by mechanical and physical properties that cause their worse machinability. During machining of “superalloys” worse machinability has negative influence primarily on the amount of cutting edge wear, which shortens durability of the cutting tool. The goal of experimental activity shown in this contribution is to determine individual mechanisms of the cutting edge wear and their effects on the cutting ability during high speed machining of nickel superalloy. A specific exchangeable cutting insert made from cubic boric nitride was used for machining of the 625 material according to ASM 5666F. The criteria to evaluate cutting ability and durability of the cutting tool became selected parameters of surface integrity and quality of the machined surface.
Journals System - logo
Scroll to top